Home / Shop / Motor Drivers / MDDS30
MDDS30
30Amp 7V-35V SmartDrive DC Motor Driver (2 Channels)
₱5,899Only 1 left
On this page: Description · Features · Resources · Competitions
Description
We know DC brushed motor is widely used for many different applications; from conveyor, AGV (Automated Guide Vehicle), mobile robot and combat robot. One of the reasons is the ease to use it, just connect the two terminals of motor to power respectively, it will start rotating, so simple. Yet, to control the speed and direction from a controller, a motor driver is needed.
This is MDDS30, with the ease of accepting the RC (Radio Control) signal to drive two DC brushed motors in independent or mix mode, it is perfect for combat robots. Not to forget it supports up to 80Amps of peak current (1 second) and 30Amps continuous current at each channel, best for medium power motor.
With MDDS30's wide operating voltage range, you can now series up two SLA battery to power your motor as it supports up to 35VDC input. And you only require one power input to operate the motor and driver. Don't worry, 3-cell and 6-cell Li-po battery are within the operating voltage
Features
- Bi-directional control for dual brushed DC motor.
- Support motor voltage from 7V to 35VDC.
- Maximum current up to 80A peak (1 second), 30A continuous, each channel.
- On board MOSFETs are switched at 18 kHz for quiet operation.
- Regenerative Braking.
- On board Error LEDs to indicate: (each channel)
- Input Error (Blinks 2 times)
- Under Voltage Warning (Blinks 3 times)
- Over Voltage Protection (Blinks 4 times)
- Over Temperature Protection (Blinks 5 times)
- Thermal protection.
- Current limit protection.
- 3 PINS Cooling Fan Connector
- Multiple input modes:
- RC (Radio Control)
- Analog voltage from potentiometer/variable resistor/joystick
- PWM and DIR (sign-magnitude and locked-antiphase) from microcontroller
- Serial Simplified or Serial Packetized from microcontroller
- GROVE compatible connectors for control input.
- RC (Radio Control) friendly connectors.
- On board push buttons for fast test and manual operation.
- On board LED indicators for Error, RUN, Over-current, motor output, for each channel.
- NO POLARITY PROTECTION FOR V MOTOR.
- Dimension: 81.28mm(W) x 101.60mm (L) x 42mm (H)
Resources
Manuals, Arduino code and tutorial videos for this product will be listed here, and in the Flouw Robotics Lab.
Competitions
For use with any Flouw robot.
Titles won with this kit will appear here when the Hall of Champions opens.
You may also like
All motor drivers
